ネイルアンカー FNA-Ⅱ6 は高耐食性ステンレス製 (SUS836L相当)のアンカーです。The FNA II is set in a time-saving manner in the push-through installation with just a few taps of the hammer. 施工された FNA-Ⅱネイル アンカーは載荷下で自動的 に拡張。 コーンが拡張クリ ップ内に引かれ、孔壁へ拡張します。ネイルアンカー FNA-Ⅱ6は耐火ボード、換気システム取り付けレール等を高耐候性が必要なエリアで施工に適しています。
アプリケーションと認可
認可
ETA-06/0175
DoP No. 0235
GS 6.1/21-076-1
組立て方法
Functioning
The FNA II with nail head is suitable for push-through installation.
The installed nail anchor FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall.
Available setting tools: FNA S-SBO to slip onto the drill, FNA S-SDS for series installation with a drilling hammer, FNA S-H for the manual installation of mounting rails.
European Technical Assessment for fischer Nail anchor FNA II - Load controlled expansion anchor for multiple use for non-structural applications in concrete
Assessment of the load-bearing behaviour of fischer nail anchors FNA II R and FNA II HCR under tension load and one-sided fire loading according to the ZTV-ING-curve
Nail anchor FNA II - Permissible loads for a single anchor for multiple use of redundant non-structural applications in normal concrete C20/25 up to C50/60.